Active search icon


Let's get smart

Smart meters are the next generation of electricity meters providing you with a better way to manage your energy use. With a smart electricity meter you receive accurate and up to date usage information. We’re currently making a small upgrade to some of our electricity meters, replacing the communications card to provide you with faster and more reliable data than ever. Click here for more details.




Keeping your energy prices low

By being able to remotely read your electricity meter, and avoiding local meter reading charges, we are able to reduce costs. We can even provide you an alert if your solar generation system stops working. 

Accurate and timely readings

We read your meter remotely on a daily basis and validate its accuracy before sending to your retailer. You can track and view your energy usage by registering free of charge on the myHomeEnergy portal at any time. 

Quality and safety of electricity supply

Our meters record interruptions to power supply. By monitoring and earlier detection of faults we can deploy teams for investigation and restoration of your power,  and mitigate potential safety issues faster.


Quick SOLAR and battery connections

By using data obtained from our Smart meters, we can effectively assess the condition of our network so we can quickly asses your solar and battery application for approval. 

  • How can I find out how much energy my house is consuming right now?

    Your meter displays the total accumulated amount of energy (in kilowatt-hours) from the time the meter was installed. If you are interested in knowing how much power you are actually using now, you can access real time energy information by pushing the Alt 1 button1. The LCD screen will display voltage, current (ampere), frequency and your real time power use measured in watt hours

  • How can I find out my SOLAR exports?

    If you have connected an approved SOLAR or generation type system into our electricity distribution grid, your meter will be reconfigured to allow it to record all of the excess generated energy produced by your system, and imported into our distribution grid. This is referred to as a “NET” metering arrangement as it allows you to use all of your generated energy in your dwelling first, before importing any excess energy generated back into the energy grid. If you want to see how much excess energy you have generated into the energy grid, push the “reading your meter” button on the meter until register number 13 is displayed. This will display the excess energy in kilowatt-hours since the generation system was installed, and the meter re-configured to suit.

  • How can I tell if my meter is connected?
    The LCD screen will display the word, “connected” once the power has been established to your meter. If you are awaiting re-connection of your existing electricity supply, you will see the LCD display indicating the state of your meter as “disconnected”. Once a request to connect your supply has been received, we will remotely activate the meter into a “connected” state.
  • What can I do if I use all of my electric hot water before the next overnight re-heat cycle?

    If you rely on electric hot water, you can activate additional re-heating time if additional hot water is required. By pushing the “boost” button on your meter for 3 seconds, you will see a countdown time resulting in a “boost activated” command being displayed on the LCD. The “LC” (load control indicator on the LCD display will change to “LC1”when the contactor is switched on. When the load control for hot water is opened, the LCD display reverts back to its normal default position and “LC” will remain displayed on the screen.

    The boost function allows for your hot water system to be re-heated for a 4 hour period. The timer will default back to its normal overnight re-heating cycle after 4 hours. You can choose to manually turn off the “boost” cycle by pressing the boost button again for 3 seconds.

  • Does my meter tell me what my voltage level is running into my house?
    Yes. You can access real time energy information by pushing the Alt 1 button1 located on the meter. The LCD screen will display voltage, current (ampere), frequency and your real time power use measured in watthours
  • Why is there a red light flashing on my meter?

    You will see a red LED light flash on your meter. This is normal operation. Generally, the LED will flash for each watthour of energy that the meter is recording. We are unable to disable the red LED as it is a required function of the meter.

  • How can I read my meter?

    All of the AusNet smart meters are configured to display as a minimum, date, time and total accumulated energy. We remotely collect meter reads at least once a day, which includes energy, used in each 30 minute interval period each day. If you would like access to this data, please register your interest via the My Home Energy portal by visiting

    If you have SOLAR, and additional set of energy registers are displayed to make it easy for you to see how much energy, you have generated back into the energy grid

  • Is my meter safe?

    All of our meters comply with strict security, accuracy, health and safety, and radio frequency emissions regulations. Contrary to opinion, our meters do not constantly communicate and stream information to our back office. Generally, remote reading of your meter only occurs four times per day and will only be communicating for less than 30 seconds at each time to retrieve and send data remotely. At all other times, the communications system is in sleep mode.

    Customer concerns have emerged about RF emissions in smart grid deployments, and they typically stem from broader market concerns regarding RF emissions from a variety of sources in our daily lives including mobile phones, microwave ovens, televisions, and wireless modems.*

    AusNet Services uses 900 megahertz (MHz)) radios in its metering solution – the same approved frequencies have been used for many years in devices such as baby monitors, portable phones, remote controlled toys and medical monitors.  

    This technology uses this low-power radio frequency (RF) to hop from radio to radio in a neighbourhood “mesh” to reach a smaller number of pole-mounted radios located on our distribution power pole.. Those pole-mounted radios then send the meter information to data centres, typically through standard mobile telephone networks….in our case Telstra 3G and 4G.

    A few other points about RF emissions:

    • RF emissions levels are low for smart grid devices and become dramatically weaker as you move away from the device. Unless you are standing immediately next to a device (e.g., touching the device) for extended periods, the RF emissions levels are extremely weak.
    • Most devices are not “always on.” Rather than sending continuous output, our meters are idle most of the time, waking up only periodically to send a brief transmission before going back to sleep.  An individual meter on a home is idle much more than 99% of the time.  
    • Power output matters. Many devices in our everyday environment produce RF fields, including cell telephones, microwave ovens, baby monitors, portable phones, and wireless Internet services. In comparison, our devices generally produce far weaker RF emissions. The emissions of all devices, including our pole-installed Access Points, comply with the levels required by strict federal regulations and permitted by various international recommendations. 

    * reference Silverspring Networks RF Emissions and the Smart Grid

    More information in respect of Standards and guidelines relating to RF signal and radiation exposure can be located at the following authorities.

    ARPANSA (Australian Radiation Protection and Nuclear Safety Agency) and its report “Measurement of Extremely Low Frequency Electric and Magnetic Fields Associated with Electricity Supply and Distribution Infrastructure”.

    Reference can also be made to the Australian Radiation Protection and Nuclear Safety Agency, (2002) “Radiation Protection Standard for Maximum Exposure Levels to Radiofrequency Fields - 3 kHz to 300 GHz”, Radiation Protection Series, No. 3. 

    ARPANSA Preliminary Measurements of Radiofrequency Transmissions from a Mesh Radio Smart Meter ARPANSA Technical Report No. 163



Where can I get more information?

For information about getting a smart meter, or options if you don’t want one, talk to your electricity retailer.

For details about the Australian Energy Market Commission’s (AEMC) Power of Choice reforms, visit the AEMC website.

More information about your rights as a consumer, see the Australian Energy Regulator website

We're improving the way we read your electricity meter

We’re making a small upgrade to your electricity meter with a new communications card, to provide you with faster and more reliable data than ever. 

Upgrading your electricity meter

AusNet Services is your Electricity Distributor, providing electricity to your property. Our specialised technicians will be visiting your area shortly to make a small change to your electricity meter, replacing your current communications card within the meter with a new, upgraded card. This will improve how we communicate with your meter and reduce the need for future visits.

How will you be impacted?

We don’t need to turn your power off, and you won’t lose electricity supply to your property. The task will take less than 15 minutes to complete, and there is no need for you to be there. We just need safe and unrestricted access to the electricity meter. Please make sure there is clear and safe access to your electricity meter.

What are the benefits?

  • Our communications to your electricity meter will be faster and more reliable, meaning 
    • more efficient delivery of energy data to your Energy Retailer 
    • easier billing
    • less times we need to manually read your meter
  • This improvement allows us to identify and fix potential faults on the electricity network faster
  • You can now track your energy use online – just register with myHomeEnergy
If you have any queries, please contact AusNet Services on 1300 360 795.